dunno the nut size but feel free to introduce yourself in here

http://zx-10r.net/forum/forumdisplay.php?f=70

BD

 

Hello all. Was wondering if anyone knew the size of the clutch nut or socket size I would need to buy in order to remove the clutch basket. Need to get ready to replace the clutch. Thanks everyone.

There is no need to remove the basket to do a clutch. just take out the allen head screws holding the springs and it will fall apart.

 

Well, anyone know what size it is? I am in the process of replacing tranny components and I need to remove the clutch. It is either 25mm or 26mm. Please help. Thanks!

 

Well, anyone know what size it is? I am in the process of replacing tranny components and I need to remove the clutch. It is either 25mm or 26mm. Please help. Thanks!

get both take the wrong size back then let us know :thumbsup:

 

:welcome: 1FatNinja

 

Well, anyone know what size it is? I am in the process of replacing tranny components and I need to remove the clutch. It is either 25mm or 26mm. Please help. Thanks!

27MM and use a 6 point socket. You will need to make a tool to hold the clutch basket and i would hit it with an impact.

The torque spec is 94FT lb if remember right.

 

27MM and use a 6 point socket. You will need to make a tool to hold the clutch basket and i would hit it with an impact.

The torque spec is 94FT lb if remember right.

I tried a 27mm and it is too big. Are you sure you used a 27mm?

 

:welcome: 1FatNinja

 

:welcome: :welcome: :welcome: :welcome: :welcome: :welcome: :welcome: :welcome: :welcome: :welcome: :welcome: :welcome: :welcome: :welcome: :welcome: :welcome:

 

dang texan anywho!! :helmet:

BD

 

:welcome: :welcome: :welcome: :welcome: :welcome: :welcome: :welcome: :welcome: :welcome: :welcome: :welcome:

 

Thank you all for the welcomes and the information. I will confirm with you all when I'm sure. Thanks again for your help.