I just purchased a 2011 zx10r. The warning light and esd light is on. I seen a lot of people saying it’s a bad battery. But what else could it be if it’s not a battery related issue.
Alambert20
Ummm, just to clarify things a bit. The red warning light is the low oil pressure light. It needs to be accompanied by another warning to detail out what the issue is. If the red light is on along with the FI tag, then there's a service code. The ESD warning light is separate since it has it's own ECU. You need to understand the lights better and what they mean along with the code that is causing it.
The ESD warning "could" be a low battery voltage, but it's not that common. It may be a fuse that's blown, it could be that you're moving while the system is starting up and it can't align properly, it could be a bad ESD drive motor, etc, etc. Literally it could be fu@#ing anything as previously stated 3 times in the posts above.
The ESD warning "could" be a low battery voltage, but it's not that common. It may be a fuse that's blown, it could be that you're moving while the system is starting up and it can't align properly, it could be a bad ESD drive motor, etc, etc. Literally it could be fu@#ing anything as previously stated 3 times in the posts above.
Wow. That's a good catch on that. You're right of course! I didn't actually process that when I saw the G4 tag and assumed it was a '13 or later version with the ESD. Damn I'm getting old.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
