[ypyk_xau]

Put 4-2-1 full exhaust with long secondary runners. Bike will pick power everywhere. Will compliment this good setup.

 

[Vik]

then replaced the full tank lining with a small carbon fiber. as far as I remember, it turned out -600 grams

 

[Vik]

Put 4-2-1 full exhaust with long secondary runners. Bike will pick power everywhere. Will compliment this good setup.

my chart is the top one, among those below, there are charts with a full 4-2-1

 

[Vik]

then I install titanium parts again

made the rear engine mount studs



upper rear shock absorber mount



Oem



my detail



pendulum axis with eccentric mechanism

Stock



My detail



as you can see, we do not just copy the details, but modify them









we also made a titanium rear wheel axle with a nut and a magnesium chain tensioner stop

Oem

My detail



the axle can be made lighter, but there are some concerns

 

[Vik]

on my yamaha r1 i used a carbon fuel tank



this time I decided to try to make an aluminum

some difficulties arose with him, one person made, the second had to correct the shortcomings







Весит 2 кг



oem tank weighs 4 kg

 

[Vik]

then weighed the plastic lining and decided to change it to carbon

fiberglass bottom, sidewalls and front fairing weigh 3.6 kg, while carbon body kit weighs 1.3 kg

 

[Vik]

I also wanted to install a monocoque rear subframe on my yamaha r1, but unfortunately I could not do this. It turned out to be a little easier with kawasaki, but I waited for this detail for about a year









I also installed a new glass, I do not know who its manufacturer is, I bought it on wrs.it high flexible and does not distort the view

 

[Vik]

in this configuration drove 2021. improved time on two of the three runs I have ridden. on track days I was not lucky with the weather, so I spent a little time on the track. also found errors in the traction control system (fixed by ECU firmware). The motorcycle now weighs 162.5 kg with oil, antifreeze, battery, but no gasoline in the tank.

 

[Vik]

I also found out that the location of the footpegs does not suit me. but there is no way to move it closer and raise it higher. that's why we made modified plates


when I find a comfortable position, I want to make the footrests without adjustment to remove all these plates and bolts.
but now I will only be able to try in 2022.
In the meantime, the time comes for new dorobotok and tuning))
I hope we can make our plans come true

 

[Viduz]

Hi! Just an info: i installed a USA ECU and in fact my graph is like below. Seems that I missed a lot of rpm at the end of the curve. I installed also racing intake camshaft.

Any advice?

Thanks

 

[Vik]

ecu for the US market limit the maximum power by covering the throttle valves at high revs

 

[Viduz]

Can you help me sharing file map? [email protected]

I will use it like base point for dyno map

 

[Vik]

unfortunately I don't have it, but you can contact the person who tuned my motorcycle

Увеличение мощности МОТОЦИКЛОВ (@winde_moto) • Instagram photos and videos

instagram.com

 

[Viduz]

Thank you very much Vik! I would your motorbike great job

 

[Porschenut]

Wow. Very impressive build!

 

[Vik]

I upload a video of the assembly of the motorcycle to YouTube.
can be viewed with automatic translation

Тормозная система brembo мотоцикла. Собираю новый гоночный байк часть 6.

Как оказалось, не у всех есть понимание о сочетании различных компонентов в тормозной системе, по этому в этом ролике не просто собрал тормоза, но и рассказал.

youtu.be

Цветной дисплей с дата логгером AIM. Собираю новый гоночный байк часть 7

Установка новой приборки, с возможностью записи данных.

youtu.be

Новый гоночный байк часть 8, доработка эирбокса.

В результате удаления "экологии" появилось свободное пространство, позволяющее увеличить объём эирбокса.

youtu.be

 

[Vik]

 

[OveRReV]

I'm following this build, are you going to make & sell some of your custom made parts? I'm interested in a few things.

Titanium chain guard with rectifier regulator bracket.

Titanium upper shock mount.

Titanium front & rear wheel axles.

Titanium swingarm axle.

Titanium swingarm eccentric inserts.

I'm in the process of building a 2018 ZX10RR track bike for myself & your craftsmanship is superb. Hope you're doing well.

 

[Vik]

 

[Vik]

I'm following this build, are you going to make & sell some of your custom made parts? I'm interested in a few things.

Titanium chain guard with rectifier regulator bracket.

Titanium upper shock mount.

Titanium front & rear wheel axles.

Titanium swingarm axle.

Titanium swingarm eccentric inserts.

I'm in the process of building a 2018 ZX10RR track bike for myself & your craftsmanship is superb. Hope you're doing well.

Thanks buddy!
Unfortunately, due to the situation in the World, I will not be able to sell and ship parts to another country.
And buy too. because of this I am now having trouble building my kawasaki zx-7r.