Kawasaki ZX-10R Forum banner

1 - 16 of 16 Posts

·
Registered
Joined
·
890 Posts
Discussion Starter #1
I know this has probably been discussed before, but can someone please tell me if gen 4 rotors will fit a gen 3 without any sort of modifications or spacers for the calipers.

Thanks
 

·
Registered
Joined
·
1,902 Posts
I swear they did. I had a gen3 front wheel on my gen4. They have the same bolt pattern. Should be the same rotors from 2006-2015. 310mm
 
  • Like
Reactions: wunnam

·
REPOST Enforcement Mod
Joined
·
14,970 Posts
I swear they did. I had a gen3 front wheel on my gen4. They have the same bolt pattern. Should be the same rotors from 2006-2015. 310mm

I know they will fit in the gen 3 wheel just fine. I'm almost positive that you can't put the wheel on the gen 3 though due to the caliper mounts. You have to space the calipers up to use those rotors.
 

·
REPOST Enforcement Mod
Joined
·
14,970 Posts
I checked the part lists, and the code of the front rotors from gen 3 to gen 4 is the same 41080-0159-5C, so I believe they will fit.

Well maybe I'm the one confused.
 

·
REPOST Enforcement Mod
Joined
·
14,970 Posts
Yeah, part numbers are the same. Not sure what I was thinking. Sorry for the bad info.
 

·
Registered
Joined
·
1,902 Posts
Haha, it happens. I know a lot about ZX10r wheels since I seem to buy and sell a lot of them. First time ever I had better info than SKY.
 
  • Like
Reactions: SkyDork

·
Registered
Joined
·
1,902 Posts
Gen1 rotors are 300mm
Gen 2-4 are 310mm
Gen5 are 320mm.

I don't know about gen5 but gen1-4 have the same bolt pattern. Skydork just made me second guess myself.
 
  • Like
Reactions: SkyDork
1 - 16 of 16 Posts
Top