Kawasaki ZX-10R Forum banner

What wires from the ecu for rpm pickup on dyno?

1653 Views 3 Replies 2 Participants Last post by  ZX10RArcher
Guys at the dyno I'm using don't have the info for what wire to grab rpm from for the dyno. Anyone know which ones are usable. I tried calling some people and either they don't know or just won't teller since they aren't doing the dyno ingredients.

Huge pain in the ass to pull the tank and randomly try wires wire in a Dyno room.
1 - 4 of 4 Posts
Any of the coil wires
BK/O
BK/R
BK
BK/W

Can flip the ECU out the side and grab on there or go under the tank and direct to the coil pack. Pain in the ass on the 4th gen. 5th gen can get at it right in the tail section.
It's the Grey connecter too correct? Dynojet said the left one.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top