Kawasaki ZX-10R Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
385 Posts
Discussion Starter #1
Looking for valve clearance spec. for 2019 (finger flower tech).
 

·
Registered
Joined
·
385 Posts
Discussion Starter #3
I dont find service manual for 2019+

Spec. numbers should be smaller than for buckethead, because I measure between cam and finger now.
Shims are much bigger, but thats not important.
 

·
Registered
Kawasaki Ninja ZX10R KRT-2016
Joined
·
67 Posts
Valve Clearance parameters for the 2019.20 zx10r with finger followers:
Intake: 0.12-0.16mm
Exhaust: 0.14-0.18mm
Measure between the Cam and finger rocker.
*As per the factory service manual.
 

·
Registered
Joined
·
385 Posts
Discussion Starter #6
Thank you Cosmic, big help!

I have few valves at limit and one exhaust at 0.13mm, will adjust accordingly.
 

·
REPOST Enforcement Mod
Joined
·
14,342 Posts
Valve Clearance parameters for the 2019.20 zx10r with finger followers:
Intake: 0.12-0.16mm
Exhaust: 0.14-0.18mm
Measure between the Cam and finger rocker.
*As per the factory service manual.
Good post!

I haven't seen the softcopy of the Service Manual anywhere yet. I'd love to post it to the thread with the other ones. Maybe one of these days it will come up and I can make it available.
 

·
Registered
Kawasaki Ninja ZX10R KRT-2016
Joined
·
67 Posts
Good post!

I haven't seen the softcopy of the Service Manual anywhere yet. I'd love to post it to the thread with the other ones. Maybe one of these days it will come up and I can make it available.
Hi Sky, I got this info from my dealer as Carlos above needed it. Looks like it's gonna be a while before we get our hands on a copy.
 

·
Registered
Joined
·
1,520 Posts
They do vary slightly with country restrictions and obviously language but the UK workshop manual version is £157.00 so until its on PDF not many folks have one lol
 
1 - 9 of 9 Posts
Top