Kawasaki ZX-10R Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
235 Posts
Discussion Starter #1
I was today at track and noticed that the throttle free play is too long...I slide the rubber from the wires but did not understand how to adjust the free play...try to turn the wire screw...but it did not work ???
 

·
Registered
Joined
·
377 Posts
Follow the cables down towards the frame/fairing. You will come across an adjustment screw/bolt type thing. I adjusted mine there and it worked great. It is really tight by the frame and fairing though, but some needle nosed pliers did the trick.

There are no adjusters up at the throttle, it would make sense to have some there......are you listening Kawi?
 

·
Registered
Joined
·
34,537 Posts
Theres 2 ways to make an adjustment for throttle play 1) remove tank/airbox and assoc parts and make the adjustment @ the throttle bodies push/pull while the other is as 05Ti10 mentioned.

BD
 

·
Registered
Joined
·
235 Posts
Discussion Starter #4
Thanks guys..I will check it...

Big Daddy said:
Theres 2 ways to make an adjustment for throttle play 1) remove tank/airbox and assoc parts and make the adjustment @ the throttle bodies push/pull while the other is as 05Ti10 mentioned.

BD
 

·
Registered
Joined
·
1,945 Posts
that adjustment by the frame is a MF to get at.. stupid design IMO.
 

·
Registered
Joined
·
1,945 Posts
majtii said:
Ehh, try doing it without wearing Your gloves. :wink:

still a dumb design.. You must have small hands.. :dontknow:
 

·
Registered
Joined
·
238 Posts
Size 10 in gloves, dunno, that small?
But I agree, still easier when it's next to the handlebar.
 
1 - 8 of 8 Posts
Top