Kawasaki ZX-10R Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
445 Posts
Discussion Starter #1
I found these settings for the suspension, can someone please clarify to me exactly where the screws are for each of these settings?

My confusion is whether the rebound is on top or bottom of the forks, and rear shock / where is the comp / damping - top / bottom ? :dontknow:


settings are:

ZX-10R ('05) 5/05


Front preload: 5 lines showing

Front rebound: 4 clicks out from full stiff

Front Comp: 7 clicks out from full stiff

Rear Preload: 14mm thread showing

Rear Rebound: 1.5 turns out from full stiff

Rear Comp: 3.5 turns out from full stiff
 

·
Registered
Joined
·
34,537 Posts
fork rebound = top
" comp = bottom

use a flat screwdriver to adjust both
_____________________________________

shock rebound = bottom
" comp = top

use a flat screwdriver to adjust both

BD
 

·
Registered
Joined
·
85 Posts
I found these settings for the suspension, can someone please clarify to me exactly where the screws are for each of these settings?

My confusion is whether the rebound is on top or bottom of the forks, and rear shock / where is the comp / damping - top / bottom ? :dontknow:


settings are:

ZX-10R ('05) 5/05


Front preload: 5 lines showing

Front rebound: 4 clicks out from full stiff

Front Comp: 7 clicks out from full stiff

Rear Preload: 14mm thread showing

Rear Rebound: 1.5 turns out from full stiff

Rear Comp: 3.5 turns out from full stiff

Front rebound is top, comp is bottom.

Rear rebound is bottom, comp is top. :mrgreen:
 

·
Registered
Joined
·
85 Posts
GAAAWWWRRRR....:thumbsup:
 
1 - 5 of 5 Posts
Top