Kawasaki ZX-10R Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
131 Posts
Discussion Starter #1
just put a yellow box on, and i suck at math. so....
question is, went from stock gearing to 16/40.. anyone
got any guess's what my correction numbers should be?
10%?? any guess?
 

·
Bloo Moderator
Joined
·
23,742 Posts
I'm running 11.2% and verified at low speeds with a radar detector that may not be the most accurate, but It was a match at 50mph. I think most running this gearing is at the %15-18% but if the stock guage is off by 5% maybe I'm not to far off from where I started on stock gearing, so I live with it for now.
 

·
Bloo Moderator
Joined
·
23,742 Posts
Sorry, forgot to mention I'm running the exact same gearing.
 

·
Registered
Joined
·
1,945 Posts
I have just bought a speedo healer from a board member does anyone have the directions on how to calibrate the unit?
 

·
Registered
Joined
·
1,945 Posts
nevermind got the instructions off of there web-site
 

·
Registered
Joined
·
1,945 Posts

·
Registered
Joined
·
2,127 Posts
Catfish_ said:
just put a yellow box on, and i suck at math. so....
question is, went from stock gearing to 16/40.. anyone
got any guess's what my correction numbers should be?
10%?? any guess?

Use the calculator at speedohealer.com. The error should be the same.
 

·
Registered
Joined
·
1,486 Posts
I was going to say the same thing about speedohealers site as that the one I have.

Just do this, either do actual distance vrs indicated distance or actual speed vrs indicated speed and it will accomplish what you are looking for. Then input the info on speedohealers site and it should get you really close.
 

·
Registered
Joined
·
5,228 Posts
Crap, mine is 75%! I've tried 16.6%, 14.4%, 12% and all were way off. We'll see if this works.
 
1 - 10 of 10 Posts
Top