Kawasaki ZX-10R Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter · #1 ·
So after i cored out my Cats the bike has started popping on deceleration. I assume it's only going to get worse when i install a baffle kit.
I was thinking of installing Block Off Plates to try and help. On the Gen 2, will it throw an FI code when i remove the old equipment??
I've searched and can't find the info for the Gen2

Cheers,
 

·
Registered
Joined
·
642 Posts
I just removed valve, jumpered the connector and stuck a piece of hose between
the valves and hose clamped. Capped air box. Done.

You could also do a "Marble Mod" just plug the breather hose coming off the air box.

I've be doing the "Marble Mod" for many years on many bike. Quick, easy and free.
 

·
Registered
Joined
·
46 Posts
Discussion Starter · #4 ·
I just removed valve, jumpered the connector and stuck a piece of hose between
the valves and hose clamped. Capped air box. Done.

You could also do a "Marble Mod" just plug the breather hose coming off the air box.

I've be doing the "Marble Mod" for many years on many bike. Quick, easy and free.
Thank you, maybe i'll just give that a go

I installed ivans kit on my gen2, removed hoses and sensor..no light.:mrgreen:
Awesome, good to know. Thanks
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top