[jsosmp]

Gents i have just joined the thread, i have a first gen and its not maknig that much power ... 154hp on an old hyper power ... the bike has a full Akrapovic but just does not seem fast enough ... can we not start a thread (short list) of things to do to get these bikes up and running .....:

 

[cuhuba]

Found these in less than 5 seconds, just for starters

http://www.zx-10r.net/forum/showthread.php?t=66248&highlight=top+mods

http://www.zx-10r.net/forum/showthread.php?t=42231&highlight=top+mods

http://www.zx-10r.net/forum/showthread.php?t=8805&highlight=top+mods

Just hit "search" and ask away. Welcome to the site. Warning, you are about to get eaten up by the "search" police, and appropriately so.

 

[Scott10r]

:welcome: to the site. I was wondering what elevation you are at. I'm at 4500ft here and lose about 20-25 hp compared to sea lvl. Also, every dyno is different, so you cant be sure that it doesnt just read a little low unless you get a couple more 05 10r on there.

 

[jsosmp]

Hi There ...I'm from the East Coast of South Africa, Iv'e been trying a few things form the site to get the bike up a few Hp's and dont seem to be able to have any decent gains .... i have done the block off plates, secondry butterflies and the full pipe and the gains were only approx 4 hp up on stock with a slip on !!!! to me that is just not cool especially here where pipes cost an arm and a leg ....