OK.. So I have an 07 ZX10R... Changed the plugs with the same that were in there... sputtering... dying... backfiring BAD.. put the old plugs back in.. exact same shit... wasn't even having a problem before I changed the plugs.. Did I damage a coil or something?
Running like SHIT!
1 - 8 of 8 Posts
So I got her back apart.. start her up... backfiring.. dying... unplug the left coil while running and she starts purring again.. so thats the bad coil? I mean it shouldnt run better on 3 instead of 4 right?.. APPRECIATE A QUICK RESPONSE... store isnt open late if i can even find a coil that they dont have to order
Joined
·
7,720 Posts
Thats why you ALWAYS do one plug at a time
1 - 8 of 8 Posts
Join the discussion
Recommended Reading
-
Gen 5: 2016- Zx10rr kqs
Performance and TechI have annoying problem with the KQS. Going up 3rd is near impossible to get other than the first two laps. It was the same with the stock pegs, is the same with rearsets. The bike had the recall for the suspect gear and I feel the KQS to 3rd got worse after that, although it did more track work...- 3
- 377
-
Gen 1: 2004-2005 Simple engine build
Performance and TechI'm starting to build up a new motor for my G1 track bike. I have gathered a clean core motor (28k, almost all highway commuter miles, great compression), G1 kit intake cam, and a few other items. I tore the motor down yesterday to send the head out for a clean/beadblast/mill/port/rebuild and...- 39
- 3K
-
EvokedPotential · updated
-
Clutch Issues
Performance and TechTech question. Bike stalled on me the other day when I was rolling up to a stop sign with the clutch pulled in. Now when I try starting the bike in first with the clutch pulled in the bike moves forward. Like the clutch isn’t disengaging. I have proper 3mm clutch lever free play. Took the cover...- 4
- 116
-
KEValenta · updated
-
Over Fueling
Performance and TechHi There, I’m in NewZealand and race an Open Wheel Lightning Sprint, have just installed a 2008 zx10r. Had an ECU flash done then onto dyno for tuning, for some reason a sensor is telling it that it needs more fuel than necessary, fuel pressure set at 43psi but far too rich, went as low as 28psi...- 1
- 93
-
Gen 4 throttle bodies on Gen 5 engine - gear sensor
Performance and TechIf a gen 4 throttle body, wire harness and ECU are installed on a gen 5 engine, will a gen 4 gear position sensor work properly on the gen 5 engine? I've read that a gen 4 gearbox can be installed in a gen 5 engine and then the gen 4 gear position sensor will work. I'm wondering if the gen 4...- 2
- 182
Join now to ask and comment!