Kawasaki ZX-10R Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,202 Posts
I had one on my bike worked well just watch the pickup. Ive heard that the fall off. Never happened to me but heard it has
 

·
Registered
Joined
·
357 Posts
I bought one used and the o-ring that came with the pickup (i don't know if its the one RPM provides) would not have sealed it to the motor so i cut the bottom of the factory seal off and made my on o-ring. If you get one you will see what im talking about. I also heard of them falling off so i drilled and tapped another set screw and used lock tight. I was kind of paranoid so i welded a slug to the bottom of the pan so if for some reason it did, it wouldn't fall off completely and i would see a drop in pressure. I havent had any problems .
 

Attachments

·
Registered
Joined
·
2,297 Posts
Discussion Starter #5
thanks guy's thats why i was asking, i have a friend that got one for sell but i heard some of the same stuff, I was told that you have to pull them down and keep a eye on that pick up, thanks again:thumbsup:
 

·
Registered
Joined
·
49 Posts
you can call adams and they will cut your stock pan and put a pick in it for 150.00.....
 
1 - 6 of 6 Posts
Top