Kawasaki ZX-10R Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
590 Posts
Discussion Starter #1
Hi guys. I know this isn't a ZX10 problem, but I'm hoping some of you guys has an idea about this. My wife's 08 R6S sounds like it's missing on one cylinder intermittently when it's idling and running below 4 grand. It runs perfect, and pulls hard (for an R6) when she gets into it. The bike idles fine for awhile, then runs on 3 for awhile, then runs perfect again. This bike has 3000km on it, and has a slip on. She pulled the coils and plugs this morning. The coils all tested within spec, and all the plugs except one were fine. The one that wasn't fine was wet, which makes me think that she might have a fuel injector nozzle half plugged and slobbering? Does this sound plausible? Any suggestions or ideas welcome. Thanks guys!
 

·
Registered
Joined
·
129 Posts
I don't know how hard it is to swap injector locations on an r6s, but if it's easy swap 2 and see if the problem moves with the injector. If it does send them out to be cleaned and balanced
 
1 - 4 of 4 Posts
Top