Kawasaki ZX-10R Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
69 Posts
On ABS models, with some rearsets the rear master cylinder can't stay in the same position as stock, so it will require a longer rear line (the one that goes to the abs module) to make it possible to fit. As for the manual, it requires the disassembly of the swing arm to remove that hose, but I don't know if there's some sort of a trick to do this without remove it. The best solution for me is opt for a rearsets kit that doesn't require the reposition of the master cylinder.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top