Kawasaki ZX-10R Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,330 Posts
Discussion Starter #1
Hey all,
if you have a puig screen installed maybe you can help
I took my old screen off in a hurry and didn't pay attention to where the metal arms go between the screen and fairing or just the very bottom under screen.
if it goes between the puig doesn't have a seemless line/poor fit.

or

if it supposed to go under the puig doesn't fit at all.

any help would be good.
thanks in advance.
 

·
Registered
Joined
·
536 Posts
The metal reinforcement arms go under the screen, not between the screen and fairing. Mounting the Puig changes the orientation of the fairing slightly. You have to start from the front and put one screw at a time in going back. Even installed properly, the Puig doesn't fit flush to the fairing like the stock screen.
 

·
Registered
Joined
·
1,330 Posts
Discussion Starter #4
Thanks eveyone I was hoping it would fit better oh well...
still I can see see the tack much easier now....
 
1 - 4 of 4 Posts
Top