Kawasaki ZX-10R Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
202 Posts
Discussion Starter #1
Wanting to retrofit Projectors into my stock headlights but wanna make sure im getting the right set up that I would need to make it the easiest. From what i found I believe Im goin with these -

http://www.theretrofitsource.com/product_info.php?products_id=227

I wanna make sure im picking the right options for the bike though, so what i thought for the options were in order

Adapter plate: H7
Ballasts: Mirimoto 3five (35W)
Bulbs: H1 Mirimoto 3five (6000K)
Halos: Yes CCFLS
Shrouds: Mini Gatling Gun
Wire Harness: Relay H7

any input would be greatly appreciated, I know there is some of you out there that have done this before so any tips or instructions would be awesome
Thanks in advance
 

·
Registered
Joined
·
6,028 Posts
from each retrofit I have seen, that is the set that is used. I have no done it personally though.
 
1 - 3 of 3 Posts
Top