I have a 2006 zx10 with pc3 and I recently changed my exhaust system and decided to flash the available maps on the PowerCommander website until I get around to tuning it after winter; however, when I go to flash it i get a map error 199! =263. So, I did a bit of research to see what this means, and saw a few things mentioning zx14. I decided to download a map for a 06 zx14 and they had the same map versions as what my pc3 would accept ( the 06 zx10r maps were version 199 while the zx14 maps were version 263) Knowning this, I took apart my tail to see if it was a zx10 or zx14 pc3 and turns out i do have a zx10r pc3, (222-411). Any one know on how to change the pc3 map version? as a work around I copied over the zx14 map with the zx10 map and flashed it.