Kawasaki ZX-10R Forum banner

1 - 20 of 236 Posts

·
Registered
Joined
·
900 Posts
This thread will be for MAPS ONLY!!!!! If you have a map you would like to share please send me (Tread70) a PM or email it to me @ [email protected] All maps will need a brief description of mods and year, make , and model.

Thank You,

Tread70

Edit:Added Gillman's map to first post

Custom Map for 2006 ZX-10r w/Akrapovic Evolution Race full exhaust system & K&N Air filter


Edit 10//19/2008 by Bluedevil

Here is the link for "Map Requests and Discussions" as we are trying to keep Sticky s to Min.

http://www.zx-10r.net/forum/showthread.php?t=40888

Thanks,

bloo
 

Attachments

·
Registered
Joined
·
3,311 Posts
Tested teh Kyle map I hybrided it is really good.
I was doing all 4th gear roll-ons from 4500rpm to redline in the throttle increments.
At 60-80-100 the rear tire was struggling for grip.
I went back home and richened it up once again in the 0-2-5 range...not time for a test but the back firing is almost gone before the second richening.
 

Attachments

·
Registered
Joined
·
3,311 Posts
Latest version...i changed a lot in the 2-5-10-20 & 8-100 to make it match the a/f ratio I guessed from viewing my charts...someone try it as it will rain here for two more days and has been cold.
 

Attachments

·
Registered
Joined
·
3,311 Posts
I think the 10r is running weak for everyone when fully warmed up which means that the ECU is richening the circuit too much and we are all getting crappy power and power delivery. All I know is my bike is crazy under 190 degrees, above 202 it is a dog, feels like i'm back with the 17T front sprocket.

Anyways, I made more changes in top end of 100% throttle, 0-2-5 40-60 & 80 also. I compared my map to GZ's (after my changes) and they are suprisingly close in most areas. Mine is alway leaner below 4500 rpms then I think mine get a little richer than his. I tested v3 yesterday and it felt strong so I'm hoping v4 will be even better since before I had made no changes to 40-60% throttle.
 

Attachments

·
Registered
Joined
·
423 Posts
try my map position for me on pcusb is low:0
mid:0
high: -2
enjoy it, home mademap, no dynocenters here:sad:
 

Attachments

·
Registered
Joined
·
900 Posts
Discussion Starter #7
Summer MAP

Here is my Summer MAP done last Aug for the Muzzy Full/BMC combo. I find that my bike runs better/cooler with the Summer MAP in 85+ degree/humid weather. The MAP was done by the same tuner,same dyno,same setup but at 90deg shade temp. The original MAP I posted was done at ~50deg temp in Dec. Winter MAP was giving me some knocking under heavy load. I use to jet my 9 the same way...50 swing in air temp can change things a bit. Just thought I would share...
 

Attachments

·
Registered
Joined
·
900 Posts
Discussion Starter #8
Here is a MAP averageing the 2 cusoms I had done. Ran this MAP this weekend and it ran great. Not much difference between the 3 full systems maps, as you can see, but none the less someone migh benefit from it.
 

Attachments

·
Registered
Joined
·
29 Posts
well guys after playing around with some slip on maps i reckon i have found a good compromise all around for fast street riding and a acceptble mpg ratio so if someone want to try it and give me some feedback would be good


ps: this was tested on a european 2004 zx 10r with a yoshimura trs near sea level
 

Attachments

·
Registered
Joined
·
900 Posts
Discussion Starter #12
After spending the past couple of months fine tuning my custom MAPs, based on real world riding conditions, I have got one that really feels great. The only real change from the custom map was in the 3750-5000rpm range where I added a little more fuel. Really runs smooth and cool at cruising speeds & pulls like a freight train:eyecrazy: . Running temps (highway) are down 10-15 deg. Here is the map if anyone is interested...
 

Attachments

·
Registered
Joined
·
225 Posts
Here is a custom Fuel and Ignition map for a European model ZX-10r using standard unleaded fuel. Bike has Akrapovic Slip-on can with baffle removed, Factory Pro Velocity Stacks and a BMC Race Air Filter. My bike was recorded at 164.38bhp and 83.06ft/lb of torque with this set up. Hope this is useful to someone else who is struggling to find a map for their Ignition Module.
 

Attachments

·
Registered
Joined
·
2,173 Posts
Arata FULL system with BMC

BTW, I have been switching back and forth between these maps and I have the Ti slip-on. Best maps ive found so far, but I think for me I will need to blend the two together a bit.
 

Attachments

·
Registered
Joined
·
445 Posts
Hattori Hanzo said:
:+1: I'm also looking for a map for an 05 10R with Yoshi TRS slip-on stock air filter.

Do you have a TRE ?

If you do, then >> THIS <<< is a superior map.

I have the TRE and I am using this map on my bike and it doesn't even have the slipon yet.. Still runs awesome.

=)
 

·
Gone
Joined
·
673 Posts
pc map

hi guys, map for 04/05, racefit mega & bmc filter. i run this map on mine but use it with a racefit slash, works well. hope its of use for someone. cheers, tony :hello:
 

Attachments

1 - 20 of 236 Posts
Top