Kawasaki ZX-10R Forum banner
1 - 1 of 1 Posts

· Registered
56 Posts
Replace the spring in the CCT. Make sure the new one is still has some spring left in it. And it should push the tension-er out to where it's suppose to be.
My CCT was flattened. Crushed or had to spring left in it. The spring was pushed down to as small as it can be. I cut one loop off the spring and stretched it out using 2 needle nosed plyers to about 1/6 to 1/4 inch longer than the spring was when I pulled it out. As soon as I reinstalled it and started it I hear the chain tension get taken up and the clicking go away.
1 - 1 of 1 Posts