Kawasaki ZX-10R Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
499 Posts
In a non flashed bike, is it possible to change the power modes and traction modes while running?
from kawasaki website it does say you can on the fly.. The convenient handle switch allows the type of traction control to be changed by selecting one of the three modes, even while riding.
 

·
Registered
Joined
·
499 Posts
So if the bike is running in the sense of moving, you cannot change them.... or you can change them with the throttle closed.?
well looking at kawasaki site it does say you can change them on the fly.. never really messed with it while riding down the road myself.. its always in full power mode and traction off.. =P
 

·
Registered
Joined
·
499 Posts
here is what the manual says..
 

Attachments

·
Registered
Joined
·
581 Posts
Yeh it can not be switched on the go, according to the manual. It is kind of misleading, one point it states "throttle needs to be closed" so i assumed it meant, moving but just keep the throttle closed. Although it states "when changing the mode, stop the motorcycle." So def. need to be stopped!
 

·
Registered
Joined
·
966 Posts
you can't turn tc off unless bike is stationary. You can change tc and pwr while moving but with throttle closed. The ONLY difference a flash makes is it allows you to turn tc off while moving and the tc will stay off when you turn bike off then back on. While with no flash when you turn tc off and kill the bike it'll default back to tc1 when bike is started again.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top