Since the riding season is wrapping up for me this year im going to be ripping the bike apart and do all the things i have be putting off, like tune up, pc3, removing the exhaust valve and so on. one of the projects i have in mind is getting all of the gold off of my 05. the brakes and the rotors will not be a problem as they are getting powder coated. I also want to powder coat the upper part of the front forks. now comes the question. if i full loosen both the triple clamps will the forks slide in and out smoothly enough that if i powered coat them, when it goes back together they will not get scathed, or is it a tight fit. if so i know that the 06 SE came with all black forks will those swap over with out a problem, what about just the tops of the forks on the SE.