[TENN10]

I planned on trying out the suspension settings that the testers used during the testing this afternoon. I left my issue at work. Could someone post up the settings for me? Would be very much appreciated!

Thanks in advance.

 

[gldnchildek9]

it should be posted on there website, if you have access to a computer at the time you adjust it

 

[Deer Elk]

Front:
spring preload--6.5 lines showing
rebound damping--8 clicks out from full stiff
compression damping--4 clicks out from full stiff
ride height--6mm from top of fork cap to tripple tree

Rear:
spring preload--27mm thread showing
rebound damping--2.0 turns out from full stiff
high-speed compression damping--2.5 turns out from full stiff
low-speed compression damping--1.75 turns out from full stiff



Chris

It may also be on their website like gldnchildek9 said.

 

[rkwaki]

Front:
spring preload--6.5 lines showing
rebound damping--8 clicks out from full stiff
compression damping--4 clicks out from full stiff
ride height--6mm from top of fork cap to tripple tree

Rear:
spring preload--27mm thread showing
rebound damping--2.0 turns out from full stiff
high-speed compression damping--2.5 turns out from full stiff
low-speed compression damping--1.75 turns out from full stiff



Chris

It may also be on their website like gldnchildek9 said.

What weight rider was this setup for?

 

[Deer Elk]

What weight rider was this setup for?

:dontknow: The article does not say...




Chris

 

[Deer Elk]

http://www.sportrider.com/features/...0r_suzuki_gsxr1000_yamaha_yzfr1/throttle.html

Page 3 on the "Turn it up to 11" article... 2008s liter bike comparison... Different suspension numbers... :dontknow: Still no rider weights either.




Chris

 

[TENN10]

Thanks.

Got a little time to ride up the mountain today, just wanted to try it out.

 

[rkwaki]

TENN10 - where you at?