Kawasaki ZX-10R Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2,619 Posts
Discussion Starter #1
Hi,

I want to put my muzzy sliders on my bike this week. Any tips on installing it?

Thanks,
Rich
 

·
Registered
Joined
·
5,228 Posts
Do what the directions say as you read them. I read ahead and thought I could figure it out, but was mistaken. It's really a pretty easy install.
 

·
Registered
Joined
·
37 Posts
Hey Rich,

It is pretty simple and straight forward. I have the same frame sliders on my 10 and the only thing that I thought was going to be a problem was motor mount bolt that runs through the frame. The bolt came out with no problems I didn't have to put a jack under the motor to support it like I thought. With that taken care of the rest came together like clockwork. I hope this helps


Adam
 

·
Registered
Joined
·
2,215 Posts
lol send them back and get mine. ;)

J/K the muzzy sliders should be easy enough. I would recomment putting it on a stand to keep the bike level not just on the kickstand. Take your time and follow the directions. I've heard its a relatively painless install.
 
1 - 4 of 4 Posts
Top