Kawasaki ZX-10R Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
197 Posts
This might be common knowledge but I was floored to find out that you need to remove the swingarm to get to a bolt that holds one of the ABS line junctions going to the rear brake line. Kawi must of been having a laugh when they designed this system. While I had it off I cleaned and greased the swingarm pivot and linkage bearings. ]

I thought I would need to do the same but with rear wheel, shock and exhaust off you can drop the swingarm far enough that I got the bolt loose with a small set of vise grips.. then just wiggled it off with my fingers!!!



Sent from Motorcycle.com Free App
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top