Kawasaki ZX-10R Forum banner

making a race loom??

6113 Views 11 Replies 8 Participants Last post by  Pete lueck
hi, i've got a zx10r 04/05 model and am in the process of cutting the loom up to get rid of all the wiring and the key ignition that i don't need on the race bike.
its an american ecu, so i've got rid of the KISS system. is there anything i should keep attatched in particular (apart from the obvious things :lol:), does the water temp sensor to the ecu need to stay attatched? i want to make the run/stop swith my ignition switch, any tips or has anyone come across anything i should/shouldn't do?
i've got a race technology dash and logger so have cut all the clock loom out.
any tips or advice would be great.
1 - 2 of 12 Posts
Nobody on here is going to help you with your quesion. Because, you SHOULD give the bike back to who ever it was stolen from.
no........no!! thats not a very nice accusation!!
its my race bike.
i have the ownership papers and have for the 8 months i've owned the bike. i'm just wanting to get rid of the loom bits and key as i've bought a race technology dash.
if anyone can help but is worried i'm some kind of thieving scum, pm me your e-mail and i shall send pics of the ownership papers, the bike with the key in as it is at the moment and any other proof you need.
Just making sure. We get all kinds on here. I noticed you did have very many posts. Welcome to the site. The people on this site KNOW EVERYTHING you will need to know about a ZX-10. Best on the planet.
1 - 2 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.