Kawasaki ZX-10R Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
937 Posts
Discussion Starter #1
I have taken it apart 3 times to check the TPS wires, and they are plugged in tight.

I have loaded a few different maps, and the bike generally revs good (on stands) but it will not idle. When I try to let it idle, it dies but I can rev it to keep it alive.

I dont think its a map issue -maybe a wire problem or I damaged my TPS???

Any thoughts?

I searched around for a while and found a old thread about the "rough idle update" but I dont think it applies b/c the post was back in 04.

ANd I didnt see anything on pc website about this...

Thanks,
Andrew
 

·
Rent this space
Joined
·
6,590 Posts
Did you reset the TPS with the PC111 ?

Also dif you get the PC111 connected to the right plug, it is easy to get it wrong, as the grey and the brown plug are the same.
 

·
Registered
Joined
·
937 Posts
Discussion Starter #4
did a search and was able to reset the TPS.

I also, cleaned out the connectors really well- nd the bike idled normal...

I dont know which it was but im happy...

THANKS!!
 
1 - 6 of 6 Posts
Top