[craigntx]

my 07 10...
changing out the rear brake lever.
i back out the little nut that holds it, there's not enough clearance to get the screw out, it's hitting the plate that has maybe 4 screws.
i see 2 options to get the clearance.
remove the plate the screw's hitting, or loosen the rear-set.
which way'd be easier?
thanks
c

 

[craigntx]

ok, got it.
loosened up the 2 fwd bolts holding the rearset slightly, the offending bolt dropped out
now to figure out where those extra bolts go:mrgreen: