Joined
·
328 Posts
Mods, please read before you delete.
Hey folks.
I've got an 08 10R track bike. Legally owned. I have the key and paperwork to prove it for those of you practicing due diligence.
I removed the ignition and relocated the base with an epoxied-in lever to actuate the switch (it's a streetfighter track bike, so no room on the triple). At our last trackday, the whole assembly blew apart while I was on the front straight. Nightmare at 175mph. No power, no ignition. Coasting into the runout of turn 2. :surprise:
Anyways, I was wondering if anyone can point me to a diagram (via pm, of course) for how to wire the ignition into the kill switch. Any help would be much appreciated.
Please feel free to contact me/verify facts as needed.
Thanks,
Kirk
(425) 31nine-01nine5
Hey folks.
I've got an 08 10R track bike. Legally owned. I have the key and paperwork to prove it for those of you practicing due diligence.
I removed the ignition and relocated the base with an epoxied-in lever to actuate the switch (it's a streetfighter track bike, so no room on the triple). At our last trackday, the whole assembly blew apart while I was on the front straight. Nightmare at 175mph. No power, no ignition. Coasting into the runout of turn 2. :surprise:
Anyways, I was wondering if anyone can point me to a diagram (via pm, of course) for how to wire the ignition into the kill switch. Any help would be much appreciated.
Please feel free to contact me/verify facts as needed.
Thanks,
Kirk
(425) 31nine-01nine5