Kawasaki ZX-10R Forum banner

1 - 1 of 1 Posts

141 Posts
1.to start you have to take off the fairing pieces right under the seat. they just pop off when you remove the 1 allen key bolt.

2.next would be to remove the seat by removing the 2 allen bolts under the seat.

3.next would be to remove the 2 allen bolts on top of the steering stablizer

4. next would be to loosen the 10mm bolt behind the gas tank. dont take it out because you have a overflow hose, gas line, and a plug to remove.

5. next flip the gas tank up carefully and remove the overflow hose, gasline, and plug.

6.remove the 10mm bolt and remove the gas tank

7.remove the 8 Philip head screws on top of the filter box.

8.replace filter. reverse steps to put everything back together...

Discus this thread here:

1 - 1 of 1 Posts