Kawasaki ZX-10R Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
my zx10r have problems with a crazy noise starts at 3000rpm end at 4000rpm
the noise is a plsatic noise and came out at the nose or gauge
i have check all the plastics and treats and it is ok
if anyone know s please giveme a tip
the bike has only 10k miles

please ignore my bad english
many thx and respect to all
 

·
Registered
Joined
·
312 Posts
Is it ticking or does it sound like something is rubbing?
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #3 ·
is not ticking
is a plastic vibration noise
something else when i open the gas in neutral the body injection is shacking
cood be these the problem?
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #5 ·
two weeks ago i have hit with the nose of the bike a bird
from that moment the ninja has this noise
i observed a small crack in air tube under the gauge
 

·
Registered
Joined
·
241 Posts
check the ram air tube perhaps its off the slots a little? and only making noise at certain points .... if you havent already checked it out.... just posted and read your last comment fully thats what i would say is makeing the noise they are cheap on ebay.... or you could try jb welding it back if its a small crack then sanding it down smoothe cheap fix
 

·
Registered
Joined
·
524 Posts
Don't feel lonesome. I have the same buzz, same rpm. Finally today localized it to the "glass" in the speedo. I'm going to take it apart this afternoon and see what I can do to solidify it a bit more. :thumbsup:
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #8 ·
tomorow i m gonna undress the bike off fairings
and see what happens withdout the fairings
but the problem whith body injection?
it has to shacking when open the gas?
 
1 - 10 of 10 Posts
Top