Kawasaki ZX-10R Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1,238 Posts
Discussion Starter #1
I raced the 10R last weekend and before the race weekend I put Galfer SS lines on. I didn't get rid of the mushy front brake pull but I did get rid of the brake fade I had experienced the month before. I will now see what I can do about the mushy brake pull. After reading over some of the posts about the front brakes and some of the solutions it seems that doing some work on the calipers combined with new brake pads does wonders. So that will be my next phase of work on the brakes. I am holding off on getting the Brembo M/C. Can't afford it right now. But if I can't get rid of the mushy feel then the Brembo will be in my future.
 

·
Registered
Joined
·
1,221 Posts
Also a good quality High Temp brake fluid I use the Valvoline Synthetic and the combination of the SS lines and the fluid along with a good bleed and no ad or mushy feel 2 fingers is all I use for the street or track.
 
1 - 2 of 2 Posts
Top