Kawasaki ZX-10R Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter #1
ive been seeing lots of posts asking if aftermarket parts of gen 4 will fit on gen 5 and that got me thinking...

can anything on the gen 5 zx10r's trickle down to gen 4's?

if so, anything worth getting? (like those brembo calipers :grin2:)
 

·
Registered
Joined
·
576 Posts
I was thinking about the same thing, I might be picking up a 2016 and would then sell my 2013. But my 13 doesn't have any of the OEM stuff on it, so I was thinking about how much of the 16 stuff I could just swap back and forth...

The 13 would get sold and the 16 would be the new race bike! :D
 

·
Registered
Joined
·
1,284 Posts
Just found something interesting. Gen 4/5 fuel tanks are the exact same but they reversed the plugs on the harness and pump. I thought my fuel pump was going bad (turned out to be bad gas) so I threw a Gen 5 tank on only to find I had two female plugs.
 

·
Registered
Joined
·
2,164 Posts
PHP:
ive been seeing lots of posts asking if aftermarket parts of gen 4 will fit on gen 5 and that got me thinking...

can anything on the gen 5 zx10r's trickle down to gen 4's?

if so, anything worth getting? (like those brembo calipers :grin2:)
Calipers will not fit.
 
1 - 6 of 6 Posts
Top