Kawasaki ZX-10R Forum banner

Gen 5 Rev Limit

3902 Views 8 Replies 4 Participants Last post by  Joseyx
I've spent the last couple of days searching for the stock rev limit for my 2016 ZX 10R and haven't found it! I've been through spec sheets, my owner's manual, and this forum and have had no luck! Would anyone be kind enough to please let me know what the bone stock ZX 10R rev limit (max RPM) is?

Thank you!
1 - 9 of 9 Posts
If anyone has the woolich flash in the oem licence it is....


Enviado desde mi iPhone utilizando Tapatalk
To my surprise for example the 2015 r1 is real 13500 and in the forum people talking about 14000 stock

Gen 4 if im not wrong is 13550


Enviado desde mi iPhone utilizando Tapatalk
When i installed the woolich it was set stock to 14k. I've since flashed it to 14.1k and haven't gone beyond that. Are you looking for the max limit the the bike can do?
Hi and thanks!

Yes, the stock RPM limit for the motor. From staring at the tach, it looks like about 13.7.
MPP12 - thank you very much!
stock limit is 13600
You can safely raise it to 14100 without experiencing any issues. This motor is amazing, it continues to make power all the way to 14k rpm! Kawi just played it a little too safe with the rev limiter. KIM anything higher than 14100 and you may be looking at a blown engine down the road. YMMV.
~

You can safely raise it to 14100 without experiencing any issues. This motor is amazing, it continues to make power all the way to 14k rpm! Kawi just played it a little too safe with the rev limiter. KIM anything higher than 14100 and you may be looking at a blown engine down the road. YMMV.
Wow! That's a wee bit higher that book value! No issues with valve float, coil bind, etc.? No doubt it is a fantastic motor... how about the whole bike?!
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top