Kawasaki ZX-10R Forum banner

1 - 7 of 7 Posts

·
Squid wannabe
Joined
·
6,073 Posts
They are larger than the gen 1. Would require 5mm spacers for the calipers.
 

·
Registered
Joined
·
54 Posts
Discussion Starter #3
They are larger than the gen 1. Would require 5mm spacers for the calipers.
Someone might be selling some T-Drive 320mm discs which he had for his gen4, but he sold it and got a gen5 so he won't be able to use those Brembo's.

I already have 320mm HPK Brembo's, so diameter wise they will fit. Just need to know really if they will fit on the rim itself.
 

·
Registered
Joined
·
341 Posts
I'm fairly certain that they will not fit. The Gen 1 disc carrier is flat, while I believe the Gen 4 is offset. From looking at a Brembo box, it appears the carrier, Gen 4, has a 15mm offset.
I realize this is an older post, and you may have the answer already.
 

·
Registered
Joined
·
6 Posts
Both discs are flat, so no offset, it's the bolt pattern I need to know if they match up is all
 

·
Registered
Joined
·
641 Posts

T-Drive Front Floating Rotor Kit (320mm) - 208A98522

  • Kawasaki ZX10R 2004-2015
  • Kawasaki ZX14 (ABS) (ZZR1400) 2008-2015
  • Kawasaki ZX14 (ZZR1400) 2006-2015
  • Kawasaki ZX6R 2005-2016
The following bikes have 300mm rotors stock, 320mm rotors can be used but additional spacers / longer bolts will be required.

  • Kawasaki ZX6R 2005-2010
  • Kawasaki ZX10R 2004-2010
 
1 - 7 of 7 Posts
Top