Kawasaki ZX-10R Forum banner
1 - 17 of 17 Posts

·
Registered
Joined
·
23,742 Posts
Discussion Starter · #1 ·
Dismantling now let me know what you need I probable have it.

Prices Negotiable but since it’s site rules I will post a price for the Engine at $650 buyer pays all shipping costs and arrangements.
Engine Specs:
Approximately 53K miles
Generator Shim upgrade performed.
Valves adjusted at recommended intervals oil changed 2 twice a year or when mileage demanded it.
Water pump replaced
All stock internals
Dyno- 156hp SAE

Other possible parts available:
Akrapovic Stainless steel full exhaust can and Link pipe only
Rear Rim with Pilot Power tire tons of thread left.
Wiring harness missing headlight harness
Rear swing arm extensions I believe 4-6inches not sure and steel braided lines
Front Steel braided lines
Rear rim tire hugger
CRG brake and clutch levers
Rear Shock
Thottlemeister cruise control
Misc hoses and switches

I have other parts I bought over the years from other project bikes so it doesn’t hurt to ask if you need something I most likely have it.
I don’t check the site often so best to reach me at one of my emails so use this one below:


[email protected]
 

Attachments

·
Registered
Joined
·
23,742 Posts
Discussion Starter · #2 ·
Front Steel Braided lines and Clutch/Brake levers sold!!!

Thank you Ryan he was local boy here so was an easy transaction and nice guy too hope to due business with you again thanks.

Other possible parts available

Lockhart Fender eliminator kit- $25 plus shiping
Key set meaning ignition, tank cap and rear tail truck parts all together $150

I have so many parts from other projects please ask you don't have to see it advertised in this thread because I don't even remember what I have just know I have tons and tons of Gen 1 parts so feel free to contact you might get lucky that I have what you want.

bloo
 

·
Registered
Joined
·
777 Posts
Your PM is full. I'm interested in the Akro can and right rearset. PM me when you clean out your box. I'll be over the hill from Reno in two weeks for round 2.
 

·
Registered
Joined
·
23,742 Posts
Discussion Starter · #4 ·
Your PM is full. I'm interested in the Akro can and right rearset. PM me when you clean out your box. I'll be over the hill from Reno in two weeks for round 2.
Hi Rabbit,

you didn't read my first post fully there is an email address to contact me.

I can't clean up my PM Box because YSR messed up my account I had a total of 750 PMs available and now that has changed I will have to delete hundreds and hundreds of PMs I suspect now to get it right and don't have time for that.....use my email I will take care of you for your part needs. :wink:

take care bud,

Rick
 

·
Registered
Joined
·
23,742 Posts
Discussion Starter · #10 ·
Such a beautiful bike what a shame. Glad you made out ok.
Thanks John....I was thinking the same thing when my bike arrived from the toe truck.....what a beautiful bike even Wreck looked awesome...the 1st Gen Bikes will Go Down in History as such fast and Good Looking. ....Not only that Loving my New ZX14R what a amazing machine. :eek:ccasion1

Well I got lucky someone bought my engine local now have a frame to sell......in the past even moderator SkyDork thought it was illegal to sell a frame damaged but I believe if you have a clean title you can buy a frame and transfer to build a bike through a dealer......so that's my new sale damaged frame with Clean title $100 plus shipping.

so this is just a bump I am the 1st ZX10R master for parts let me know what you need I most likely have it. :wink:

bloo
 

·
Registered
Joined
·
1,302 Posts
Gotta say, after having bought a Concours 14 (yeah, I know.. old man bike) which is similar in build to the mighty ZX-14R, it is still a night and day difference how light and nimble the ol' first gen 10R's feel..
 

·
Registered
Joined
·
23,742 Posts
Discussion Starter · #12 ·
Gotta say, after having bought a Concours 14 (yeah, I know.. old man bike) which is similar in build to the mighty ZX-14R, it is still a night and day difference how light and nimble the ol' first gen 10R's feel..
Make NO Mistake If you know me I will make a bike Lighter even the Mighty ZX14R…..Some members like Gunner Call it a “FAT PIG” but they don’t put things into perspective.


In the old Days all The Fastest bikes in the World weighed about as much as the 14r but this bike has almost a 100hp more and 110ft/lbs of torque so yes your Connie doesn’t compare…….so now lets compare some more.


This bike if you lighten it or not still feels on the street just like a 1000cc bike but with massive BALLS and turns easy too almost like a 1000cc bike but what you get is a plus a long Haul Bike that can run for 1000miles a day with comfort and No 1000cc bike on the Road OR Lamborghini is going to mess with you because they can’t hit close to 200miles per hour in less than 1mile and a half like the ZX14R it is truly the KING on the road and Drag Strip PERIOD!!!! It is a `1000CC BIKE like the Original ZX10R Animal but ONLY ON STERIODS!!!! Just doesn’t have the FUN FACTOR AS THE ORIGINAL 10R. :wink:


Example of weight savings the ZX14R comes with 2 Gigantic Exhaust cans on each side, just one of those CANs weigh 15.3lbs not including the other side can link pipes and headers.


So I installed a full Titanium system headers and ALL and it weighed less than that 1 CAN at 12.7lbs so you can imagine the weight savings……and of course installed a light weight battery another 8lbs of savings along with all the stock stuff not necessary eliminated so end the end you get a light Weight 1441cc bike 200+HP 110ft/lbs torque bike MONSTER :wink:

bloo
 
  • Like
Reactions: Johns04ZX10R

·
Registered
Joined
·
1,035 Posts
Bloo you are partially right about selling the frame. It depends on the law state by state. In Nebraska you have to get "previously salvaged" brand on your title to be "legal" if you transfer a VIN to a replacement frame. In reality, all you have to do is stamp your old VIN into your replacement frame and carry on.
 

·
Registered
Joined
·
14 Posts
Thanks John....I was thinking the same thing when my bike arrived from the toe truck.....what a beautiful bike even Wreck looked awesome...the 1st Gen Bikes will Go Down in History as such fast and Good Looking. ....Not only that Loving my New ZX14R what a amazing machine. :eek:ccasion1

Well I got lucky someone bought my engine local now have a frame to sell......in the past even moderator SkyDork thought it was illegal to sell a frame damaged but I believe if you have a clean title you can buy a frame and transfer to build a bike through a dealer......so that's my new sale damaged frame with Clean title $100 plus shipping.

so this is just a bump I am the 1st ZX10R master for parts let me know what you need I most likely have it. :wink:

bloo


Tried to PM you, but your inbox is full. Please PM me I’m interested in the title and frame.


Sent from my iPhone using Tapatalk
 
1 - 17 of 17 Posts
Top