Gen 1 fork swap
Join the discussion
Recommended Reading
-
08 zx10 forks to soft?
Suspension and Tire TechHow u all going ? I've been having trouble with my 08 zx10 forks my forks have 33mm sag .rebound is set at 7 clicks out from hard. compression is at 11 clicks out from full hard .These settings are for road riding on rough choppy roads any setting stiffer i am getting bad deflection of bumps...- 9
- 1K
-
08 zx 10 suspension head ache
Suspension and Tire TechGday fellas, been out of bike scene for a while, recently got a bike, midlife crisis🙂 found a good nick 2008 zx 10, more than enough power for me, but,the suspension is driving me nuts,, im not a track rider,but i where i live,there plenty curves and bends in roads, but also bumpy,pot hole ect...- 1
- 82
-
Dave taz · updated
-
2019 KRT Stock suspension settings for track
Suspension and Tire TechHi, Would you have good idea for settings to start with at track. I'm planning to use the bike original suspension at least the first summer and learn the tricks of a liter bike. The track here in Finland are quite tecnical and include a lot of slow corners. I weigh around 200 lbs and I was at...- 1
- 87
-
Takapainoinen Taapertaja · updated
-
Swingarm custom build
Suspension and Tire TechGuys did anyone build a swing arm before- 7
- 185
-
LeoVinc · updated
-
>> Bottoming Out Forks <<
Suspension and Tire TechSo I had OEM forks & shock rebuilt with K-Tech springs to my weight, and I just got them installed. I have yet to tune them or even set sag, and I know I need more preload in the front as I've bottomed them out twice while braking over a bump in the middle of the same corner entrance. I'll be...- 10
- 728
-
Melampus · updated
Join now to ask and comment!