Kawasaki ZX-10R Forum banner
1 - 3 of 3 Posts

41 Posts
Discussion Starter · #1 ·
I managed a low side on a track day on the left hand side. Minimal damage but the gear lever took a hit. As a result the bike will happily change up gears but doesn't like to change down. The mechanism is not resetting itself so it won't change down. If I reset it with my foot it will change down.

Having had a quick look at the parts fiche it looks as though the gear changing shaft is sticking.

Anyone ever replaced one? I assume you have to go in from the clutch side but there's a spring (92145A) in there that looks like it might be the problem - how can I assess it? Is there much of an issure removing the clutch basket etc with reasonable DIY skills and tools?

Any and all pointers appreciated :biggrin:


1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.