Kawasaki ZX-10R Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
Im use to dealing with honda's, so im a little new to the free mods.
first one is, the exhaust valve with the wires under the seat connected to the pipe, when removing the box and wires, do i have to do a jumper? so i dont get a fi code?

second, i was told i could do a gp/ reverse shift by fliping the "thingy" i cant think of the name for the part. when i was looking at the shifter, it looks like it might hit the front cover. Can it be done with just floping it 180 deg?

Third, on the honda's you can swap/ disconnect the extra thrott valve in the intake, is this possible with the 09 zx10?

All of these questions mihgt have been asked on this forum but i couldnt find all of my answer's. so any links or how to's would help alot. thank you.... and hope everyone had a great x-mas!

P/S my email..... [email protected]
 

·
Registered
Joined
·
775 Posts
Just remove the exhaust valve cables and leave the servo motor in place so you don't get an error light.

You can just flip the shifter 180 degrees to get GP shifting. That is what I did. You may need to make adjustments with the shift rod to get the lever at the height you want it.

You can remove the secondary throttle plates. There is a long thread on that.
 
1 - 3 of 3 Posts
Top