Kawasaki ZX-10R Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter · #1 ·
just picked up a used gen 4 couple of days ago and i know ecu flashes are very popular.

is there any easy and quick way to find out if i have a flashed ecu without opening up my bike to see any aftermarket labeling on the ecu itself?

thanks
 

·
Registered
Joined
·
966 Posts
Turn traction control off
Turn off bike.
Turn on bike and see if traction control is off or on.
If off than you have a flash if on than you probly don't (unless it's the one flash that resets traction control setting with cycling of engine
 

·
Registered
Joined
·
2,737 Posts
EXUP valve work? air pump working? both usually disabled with flash. what's it rev to? flashed bikes usually have 500rpm over-rev. what temp do fans come on? usually it's dropped to 95C or so with a flashed bike.
 

·
Registered
Joined
·
29 Posts
Discussion Starter · #4 ·
Turn traction control off
Turn off bike.
Turn on bike and see if traction control is off or on.
If off than you have a flash if on than you probly don't (unless it's the one flash that resets traction control setting with cycling of engine
I'll give it a try, thanks!

Sent from my SM-G935T using Tapatalk
 
1 - 4 of 4 Posts
Top