Kawasaki ZX-10R Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
I am wanting to chanfe the clutch on my bike. I have roughly 10k on it.. witch should i go with and spring pressures would be ideally for all street riding with the ocassional launch
 

·
Registered
Joined
·
215 Posts
I went with ebc springs, fritction discs and barnett plates. Stack height was slightly off but worked fine for a year then started slipping. Replaced the barnett planes with oem ones and stack height is perfect and runs perfect.
 

·
Registered
Joined
·
663 Posts
I ran 6 of the heavy duty brocks clutch springs and the lever didn't seem bad at all for the street and held up to a lot of track abuse. I eventually went with 2 or 3 of cycle concepts super heavy duty springs with 3 or 4 of the brocks ones now and the lever definitely got a lot harder to pull and on a street bike in a lot of traffic I don't know if I would love it. I rode a buddys gen 4 with stock springs and thought his clutch was broken and felt weird as it pulled so soft it felt like I wasn't pulling anything.

I run the gen 1 clutch pack from cycle concepts currently and seems to be solid, always ran their gen 2-4 packs before but he stopped selling those. I've heard good things about KG clutches in the past if I remember right too.
 
1 - 8 of 8 Posts
Top