Kawasaki ZX-10R Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
292 Posts
Discussion Starter #1
Hi guys

I laid my Gen3 down at the track on the weekend and am in the process of getting her back up and running.

I lowsided and went down on the right hand side.

There was minimal damage (THANK GOD FOR FRAME SLIDERS), but I did screw up the stator cover to the point where the timing hold plug busted out and a fair bit of oil came out.
(roughly half a litre id say.)

I am having a little trouble with the clutch now.

Bike starts fine and runs like a champ, however, when its in first with the clutch in and i give it revs the bike wants to go forward.

The adjustment looks ok, could it have knocked it out a little or should i be looking at something else?

thanks
 

·
Registered
Joined
·
700 Posts
The clutch pull rod pulls on the cover if it is cracked and flexing it could do that? There are ribs inside to strengthen it and they could be broke but not cracked on the outside. That is all i can think of. other than adjustment.

Just taker her apart and see what you got.
 
1 - 5 of 5 Posts
Top