[4425]

Is this routed correctly? Can't say I'm diggin the rub on the frame...

 

[ronnulph]

Mine doesn't touch the ram air it arches over about an inch or two.

 

[4425]

Does your cable run through the bracket on the left or over it?

 

[Alien10]

My clutch cable is routed the same as your pic.

 

[ronnulph]

Does your cable run through the bracket on the left or over it?

It runs through it. After turning is lock to lock the cable worked its way down to the airbox. But no damage to the cable.

 

[Rspec99]

Mine looks the same, and I found that it COULD get hung up on the frame. I remember reading of someone snapping their clutch cable, and I can see it happening. I zap strapped my clutch cable to the top of the bracket and it arches and clears the frame easily now. Here's a link to some pics I took from another thread: http://www.zx-10r.net/forum/showthread.php?t=73194&page=2

 

[ronnulph]

I just got done putting some plastic split conduit around the cable. I guess I will check it every other oil change now. 3,900 miles and no wear on stock clutch cable. If I ever have to replace that cable I will put a steel braided cover on it.

 

[5-F Dawg]

yep thats how mine looks 6months 12,000 miles and cable looks brand new still

 

[H20-50]

yep thats how mine looks 6months 12,000 miles and cable looks brand new still

Wish I could say that. Had to replace mine at 6.5k, it wore all the way through the outer casing rubbing on the intake/frame! :headshake