Kawasaki ZX-10R Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter #1
Actually have a couple of questions for people that have/have used them..first is there a big difference between the forged and billet and what size are/were you using-this one is more important to me. I was thinking of going with the 19x20(billet)that yoyodyne just started selling.
 

·
Registered
Joined
·
1,876 Posts
19 x 18 forged here, 100% satisfied, with Spiegler SS lines on my '05.

Will use the same set-up on my '06, and eventually replace the calipers too.

:mrgreen:
 

·
Registered
Joined
·
943 Posts
Actually have a couple of questions for people that have/have used them..first is there a big difference between the forged and billet and what size are/were you using-this one is more important to me. I was thinking of going with the 19x20(billet)that yoyodyne just started selling.

There isn't any difference in performance between the forged and the billet. Just looks and the billet is lighter because has less material. On that note the lip on the back of the MS were the micro switch goes is non-existent on the billet MS so you will need to expoy the switch to the MS or use a pressure switch. As far as the 19x18 vs 19x20 its just personal perference.

Cheers,
 
1 - 3 of 3 Posts
Top