Kawasaki ZX-10R Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
652 Posts
Discussion Starter #1
I have a bike that bent rotors from going down. Some racers say they have straightened ( made usable ), by taking a hammer to the mounting pins from the rotor at the carrier. By beating them down some, this loosens the rotor from the carrier allowing the rotor to float to compensate for the bent carrier ( as long as its not bent too much ). Im tempted to try it but i know they will be ruined if it doesnt work. I could send them out to be straightened for a fee of course. Anyone done this before? :dontknow:
 
1 - 1 of 1 Posts
Top