Kawasaki ZX-10R Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
406 Posts
Discussion Starter #1
can some help me out here, are there any 320mm rotors of another bike that bolts to the 04-05mdl front wheel of the ZX10R, i have a spare set of wheels with wets but only have standard rotors, but my dry wheels have 320mm braketeck rotors, i was just wondering if something like an R1 was a straight bolt on mod?? any help would be great, i am running brembo calipers too and have it spaced for the 320mm rotors.
 

·
Registered
Joined
·
685 Posts
To get 320mm rotors, you have to find oversized zx14 rotors. I found a set for basically free (no one big against me) on ebay a while back.
 

·
Registered
Joined
·
685 Posts
thanks mate, i take it all the zx14 rotors are 320mm??
Nope. The stock zx14 rotor is 310mm... Galfer makes an oversized rotor for the zx14.
 

·
Registered
Joined
·
685 Posts
i thought i read somewhre on here you can use R1 rotors?
I believe the mounting pattern is completely different. The bolt holes are in different places and the center hole is a lot bigger.
 
1 - 7 of 7 Posts
Top