[Tsmathers33]

Just installed a kit harness + ecu and I can not get the bike to power up... Not a pep when the switch is flicked and nothing from the dash... Relays are good. lean angle is good, ground is good. I even threw the oem harness on the bike, pluged up the battery, ground, dash + key and it lit right up.............. Im lost

 

[Newf]

Just installed a kit harness + ecu and I can not get the bike to power up... Not a pep when the switch is flicked and nothing from the dash... Relays are good. lean angle is good, ground is good. I even threw the oem harness on the bike, pluged up the battery, ground, dash + key and it lit right up.............. Im lost

A couple relays from the stock harness have to be used on the race harness, have you switched them over also?


Sent from my iPhone using Tapatalk

 

[Tsmathers33]

Yes.. 3 in the tail

 

[Newf]

Yes.. 3 in the tail

Right side switches connected to the proper place on the harness?


Sent from my iPhone using Tapatalk

 

[Tsmathers33]

Yes.. There is only one place it can be plugged up to

 

[Newf]

Yes.. There is only one place it can be plugged up to

It fits in the diagnostic connector also that’s on the right side of the harness. Right switches have to be connected to the connector on the left side of the bike.


Sent from my iPhone using Tapatalk

 

[Tsmathers33]

TTTTTTTTTTTTTTHHHHHHHHHHHHHHHHAAAAAAAAAAAAANNNNNNNNNNNNNNKKKKKKKKKKKKKKKKKSSSSSSSSSSSs!!!!!!!!!!!!!!!!!!!!!