Kawasaki ZX-10R Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
361 Posts
Discussion Starter · #1 ·
I am working on 2018 zx10r with abs. i have gone through the whole bike and i am not sure why it would not spark.

so far

i have replaced
crank position sensor
ecu
most of the relays.
clutch lever sensor (bypassed and replaced)
kickstand sensor (by passed and replaced )
by passed the
ignition switch

the bike crank. fuel pump comes on. no spark.

the odd stuff happening
1- the emission sensors (on the left fairing) and the one connecting the smog under the tank are getting hot with just ignition on.
2-i got the bike to spark couple times by putting the bike in gear and pushing down on the quickshifter . i also tired with quickshifter disconnected , and replaced the quickshifter and no change.
 

·
Registered
Joined
·
2 Posts
Dont forget to Pull your ignition coils and test them with multi meter as well my r6 had bad coils a few years back and i spent entirely way to much money and head scratching for it only to turn out to be bad coils
 

·
The Pace
Joined
·
7,177 Posts
Salvage bike? Meaning, did the bike run when you bought it? let the tech guys know everything as you showed your hand by going through a 2018 10r.
 
1 - 3 of 3 Posts
Top