Kawasaki ZX-10R Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
168 Posts
Discussion Starter #1
Hi Guys, can you please give me the stock settings for 2005 ZX-10R

Greatly appreciated.

Thanks
 

·
Registered
Joined
·
1,233 Posts
rear is 1 3/4 turns out from fully seated rebound damping force adjuster. and compression damping force adjuster is 3 turns out from fully seated. front isspring preload 0.6in. from top of adjuster rebound damping force adjuster is 9 clicks out from fully seated and compression damping force adjuster 7 clicks out from fully seated position. for 150 lb rider no passengers
 

·
Registered
Joined
·
168 Posts
Discussion Starter #3
by fully seated you mean hardest or dialed all the way in? Then to adjust to stock, turn clicks out? Cheers! :thumbsup:
 

·
Registered
Joined
·
168 Posts
Discussion Starter #5 (Edited)
Sorry to bump.

So basically:

Rear:

Rebound: 1 3/4 turns out from full stiff
Compression: 3 turns out from full stiff
Pre-Load: ????????????


Front

Preload: Rings? (0.6 inches) ???????????????
Rebound: 9 clicks out
Compression: 7 clicks out

Can someone please give me the one from the owner's manual?

Thanks
 
1 - 5 of 5 Posts
Top