Kawasaki ZX-10R Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2,137 Posts
It has been covered. It will fit with some trimming.
 

·
Registered
Joined
·
1,225 Posts
You need to fab a small bracket on the exhaust side or drill a new hole ~1" above the brake line holder hole.

Also, on the front bracket the hugger doesn't fit all the way in the "groove" of the swingarm, so you need a longer bolt and a ~5/8" spacer.
 
1 - 4 of 4 Posts
Top